Wednesday, 20 May 2020 - Sentek Dynamics, headquartered in Santa Clara, CA is pleased to announce their new Bench Top (BT) Series of shaker systems. The systems range in size from 100 N (70 lbf) to 1000 N (224 lbf). Systems 400 N (99 lbf) and smaller are permanent magnet shakers and use lightweight rare earth magnets, making these systems easy to handle and portable. There are three versions of the BT Series of shakers: the BT, BT-M and BT-MTH.
The BT Series is recommended for vibration testing of small assemblies and components. These shakers have armature diameters from 60 mm (2.36 in.) to 120 mm (4.72 in.). The BT-1000 is equipped as standard with Automatic Armature Centering (AAC) and Air-Isolation Feet (AIF).
The BT-M and BT-MTH Series are our modal shakers lines. BT-M will use standard stingers while the BT-MTH is our through-hole version. On the 100 N and 200 N system the BT-MTH offers over double the displacement. The BT-MTH Series allow you to use piano-wire stingers. The BT-1000-M is ideal for the structural and modal analysis of high-mass structures. The addition of ZPR (electronic zero-point regulation and adjustable suspension stiffness) allows the user to pre-load the structure prior to applying a dynamic load.
The new Sentek Dynamics Bench Top and modal exciters are based upon years of practical experience. These systems all exhibit a high lateral stiffness and high force-to-weight ratio. They are specifically designed to help ensure the best possible performance with minimum setup time. Visit our web site at www.SentekDynamics.com to learn more about the new BT-series shakers systems.
About Sentek Dynamics: Sentek Dynamics, Inc. is headquartered in Santa Clara, California and has a Product Demonstration, Test, Assembly and Service facility located in Kannapolis, NC within minutes of Charlotte, NC. Founded in 2011, Sentek Dynamics is an international supplier of vibration test equipment. Providing turnkey solutions for the environmental test industry.
Geoffrey C. Cmar
Regional Sales Manager
Sales@SentekDynamics.com
Headquarters
2370 Owen Street
Santa Clara, CA 95054
Tel: +1.408.200.3100 | Fax: +1.408.659.8229
Product Demonstration, Service and Assembly
1548A Roger Dale Carter Boulevard
Kannapolis, NC 22081
Tel: +1.980.556.7081